Water Balance Chemicals

When looking to balance out your water chemicals we here at Paradise Pool Supplies have the best selection to choose from. From pH INCREASERS to STABILIZERS and everything in between! We have pH INCREASERS that come in 5, 10 or 15lbs, our pH REDUCERS come in 6, 15 or 30lbs, our ALKALINITY INCREASERS come in 5, 10 0r 25lbs, our HARDNESS INCREASERS come in 4, 9 or 25lbs and our STABILIZERS come in 2, 4 or 10lbs. Use our pH INCREASER as needed to raise the pH level in your pool, the ideal range is 7.2 to 7.6 ppm. By using this it slows the rapid loss of chlorine caused by low pH and slows the chlorine dissipation, so you'll use less chlorine in your pool. It stops the eye irritation, etching and corrosion caused by low pH. Our pH REDUCER is the safer alternative to Muriatic Acid, its used as needed to lower the pH level to the ideal range of 7.2 to 7.6 ppm. This chemical boosts chlorine's ability to fight bacteria and algae while stopping eye irritation, cloudy water and scaling caused by high pH levels. Use our ALKALINITY INCREASER to raise total alkalinity levels, as needed, to the safe (non-corrosive) zone. This stabilizes the pH balance in pool water and eliminates the demand for unusually large amounts of pH adjusters. It enables chlorine to work more effectively, while stopping eye irritation, equipment corrosion and plater itching caused by low alkalinity. Use our HARDNESS INCREASER to raise the hardness (calcium) level in your pool to the ideal range approximately 40 ppm. This prevents water becoming corrosive and damaging your pool's plumbing and heaters. It stops staining and etching of pool surfaces caused by low hardness levels. Using our STABILIZER cuts chlorine consumption by up to 25%! It pre-conditions your pool water to make sure the chlorine last longer. Use it to the beginning of each season to protect chlorine from the sun's damaging effects and increasing its effectiveness.