Intermatic Timer 3 Circuit Electronic P1353ME

Designed as part of the I-Wave system and for aftermarket and retro-fit applications, the P1353ME can be installed into almost any Intermatic enclosure and has the ability to program up to three circuits. Choose between six pre-programmed modes of operation, which include single speed pump or 2-speed pump/ cleaner pump combinations. In addition, programmed modes that include auxiliaries can control pumps up to 3 HP as well as underwater, landscape and/or fountain lighting. Countdown and Override features allow cycle interruptions when pool/spa service is required. All timing and protection associated with filter pump/cleaner pump combinations and two-speed pumps have already been integrated into the software.

    * 120 or 208-240 volt input voltage
    * Memory backup
    * Freeze protection
    * Heater protection (fireman switch)
    * LCD readout
    * Three ON/OFF events per day per circuit
    * Shipping weight - 3 lbs (1.4 kg)
    * Agency approval - CSA/C-US

Contact Ratings — Each circuit, All modes

    * 20A Resistive, 120/240 VAC., 50/60 Hz
    * 20A FLA@120 VAC, 96A LRA@120 VAC, 50/60 Hz
    * 17A FLA@240 VAC, 80A LRA@120 VAC, 50/60 Hz
    * 5 Amps Tungsten, 120/240 VAC, 50/60 Hz
    * 5 Amps Ballast, 120/240 VAC, 50/60 Hz

Modes

    * Mode 1 – (Aux1, Aux2, Aux3)
      The time switch is 3-circuit switch with all three switches controlling auxiliary devices.
    * Mode 2 – (Pump High, Pump Low, Aux3)
      The time switch is a 2-circuit switch with the 1st & 2nd switch controlling a two-speed pump. The 3rd switch is controlling any auxiliary device. All protection associated with a two speed pump is pre programmed into this mode.
    * Mode 3 – (Pump, Aux2, Cleaner Pump)
      The time switch is a 3-circuit switch with the 1st switch controlling a single speed pump, the 2nd switch controls any auxiliary device, and the 3rd switch operates a booster/cleaner pump. All timing & protection associated with a filter pump/cleaner pump combination is preprogrammed into this mode.
    * Mode 4 – (Pump High, Pump Low, Cleaner Pump)
      The time switch is a 2-circuit switch with the 1st & 2nd switch controlling a 2-speed pump. The 3rd switch is controlling a booster/cleaner pump. All protection associated with a 2-speed pump and booster/cleaner pump combination is pre programmed into this mode.
    * Mode 5 – (Pump L1, Pump L2, Aux3)
      The time switch is a 2-circuit switch with the 1st & 2nd switch controlling a 240V pump, where both L1 & L2 are required to be disconnected when the pump is OFF. The 3rd switch is controlling any auxiliary device.
    * Mode 6 – (Aux1, Aux2, Aux3)
      Identical to Mode 1, in which each of the three single pole circuits are defined generically and can control any load within each of its individual circuit ratings, with all three circuits acting independent of each other. However, with Mode 6, the fireman switch closes only when circuit 1 (the filter pump) is manually turned on — not when the clock turns it ON. This mode is useful when you have Circuit 1 connected to a circulation pump in the spa. When the spa is not in use, the clock circulates the water to filter it, but does not turn ON the heater. When the spa is in use, the heater is also turned ON by manually switching Circuit 1.

Paradise Pool Supplies is an authorized reseller of all products located on this site. All products sold at Paradise Pool Supplies come with a full manufacturer warranty. In the event you feel you have received a defective product, please contact the manufacturer technical service department first to try to remedy the problem prior to contacting Paradise Pool Supplies. Please feel free to contact us if you require any assistance. Paradise Pool Supplies can provide a warranty exchange service for most of the products we sell, in the event there isn't a local repair facility. Most manufacturer warranties require Installation & Repair be provided by only qualified licensed professionals on items such as heaters, pumps, automation, salt systems, etc. We recommend saving your installation invoice for future reference should a warranty issue arise.

Paradise Pool Supplies will make every effort to keep the product warranty information up to date on our site, but manufacturers are continuously changing their warranty terms. Paradise Pool Supplies cannot be held liable for these warranty changes by the manufacturer. Always refer to the warranty terms within your Owners Manual in these cases as the manufacturer will honor the terms in the manual.

All domestic orders will be shipped ground unless otherwise specified. Most orders are shipped within 24 hours. You can expect to receive your order in 2-6 business days depending on your location. Seasonal items such as safety covers, winter covers etc. can take longer due to high seasonal demand. Please call for availability of these items. Very important please take care when entering your shipping address, as FedEx and UPS charge an extra handling fee (up to $20.00) if your address needs to be corrected after your order has shipped. This fee will be passed along to you. In an effort to prevent fraud and protect our customers, Orders placed with different "Bill To" and "Ship To" addresses will be sent Signature Required.

International Orders

Overseas orders (those outside of the Continental US) we will check with you by email regarding the shipping cost prior to shipment. All customs and duties charges are paid by you the recipient. Due to a large volume of credit card fraud on overseas orders, Paradise Pool Supplies does require credit card statement documentation showing the same address as we are shipping to if you can not supply this then a wire transfer will be accepted. We will provide the wire transfer information to you at the time of your order.